Advanced FORCE GAUGES SERIES EGThe Series EG is an ideal solution for compression and tension applications requiring accuracy and flexibility in the entire 0.12 lb to 500 lb range. Features include selectable units of measurement, automatic peak memory, simple pushbutton calibration, programmable automatic shutoff, initial status of units and mode of operation, permanent configuration memory, and optional outputs (RS-232, Mitutoyo, and analog). Reversible aluminum housing allows for hand-held use or test stand mounting.
Compatible with all Mark-10 test stands and grips
Selectable units of measurement
Programmable default configuration
Peak memory for tensile and compressive forces
Push-button calibration
Battery or AC operation
Programmable automatic shutoff
Permanent configuration memory
Optional RS-232, Mitutoyo and analog outputs
Reversible aluminum housing for handheld use or test stand mounting (see below)
Same housing size for all capacities
Accuracy: ± 0.3% of full scale ±1 digit
Safe overload: 150% of capacity
Battery life: 8-10 hours per charge
Weight: 0.9 lbs (0.4 kg)
Environmental requirements: 5 - 45 Deg. C, <96% humidity (non-condensating)
CE mark
Reversible Housing - A Mark-10 Exclusive
All Mark-10 force gauges have reversible housings that allow the user to use the gauge with the load cell shaft pointing up or down, without the inconvenience of upside-down buttons and display. The housing for Series BG and Series EG gauges is reversible by separating the two halves and reassembling them with just one connector - an extra bit of engineering that will make your testing setups quicker and more efficient.
Series EG force gauges are supplied in a cushioned carrying case with AC adapter, rechargeable battery, hook, flat, user's manual, and NIST-traceable certificate of calibration.
The EG is compatible with all Mark-10 force measurement test stands. It is shown here in a compression testing application, mounted to an ES30 with optional items: digital travel display and extension rod.